Radial Water Loss Assay in Rice Roots Grown in Different Media
不同培养基质中水稻根系径向失水的测定方法
Plants growing in soil are exposed to several environmental stresses, such as soil compaction, flooding, or drought, and need to quickly acclimate to these conditions to survive. Such acclimations include suberization and lignification of the outer and inner parts of the root. Visualization of suberin and lignin depositions in roots can be done with several well-established staining techniques followed by microscopy, but these methods are mostly qualitative. Radial water loss assays provide a quick, robust, and quantitative method to evaluate the formation of suberized and/or lignified outer apoplastic barriers and how tightly they regulate water loss. Here, we provide a detailed step-by-step protocol, from harvesting the roots from soil conditions and cleaning them, to preparing them for water loss measurements, while using basic lab equipment. Since the data obtained is water loss as mass, quantitative and statistical comparisons can be performed. Finally, while in this protocol roots were grown in soil, the method can be applied to roots growing in hydroponics, agar plates, or any other growth conditions that allow non-destructive harvesting of roots. In summary, the protocol provides a fast and reliable method to assess differences in outer apoplastic barrier development of root tissues, allowing for fast root tissue screenings while obtaining quantitative data without expensive or highly specialized equipment.
Quantitative Assessment of Heat Shock-Induced Ferroptosis-Like Cell Death via Electrolyte Leakage in Arabidopsis thaliana Seedlings
拟南芥幼苗热激诱导铁死亡样细胞死亡的电解质渗漏定量评估
We present a protocol to allow continuous assessment of cell death in Arabidopsis thaliana (L.) seedlings by measuring the release of electrolytes from dying cells upon heat shock. The electrolyte leakage assay is a well-established method to quantify the extent of cell death of plant tissues exposed to pathogen infection, since the activation of the immune response leads to compromised membrane integrity and to the release of ions from the dying cell. This prolonged release of electrolytes is considered a hallmark of regulated cell death in plants. Heat shock in plants induces ferroptosis-like cell death, which can be suppressed either pharmacologically, using inhibitors such as ferrostatin, or genetically through knockout of ferroptosis-related genes. Here, we have adapted the electrolyte leakage assay to quantify cell death in young Arabidopsis seedlings exposed to a heat shock previously shown to induce ferroptosis-like cell death. We also illustrate how this method can be used to assess activation of ferroptosis-like cell death in whole Arabidopsis seedlings using ferrostatin or knockout mutants of potential gene candidates involved in ferroptosis-like cell death.
Quantification of Protochlorophyllide (Pchlide) Content in Arabidopsis Seedlings Using a High-Performance Liquid Chromatography (HPLC) System
利用高效液相色谱法(HPLC)对拟南芥幼苗中原叶绿素酸酯(Pchlide)的含量进行定量分析
The protochlorophyllide (Pchlide) level is a crucial indicator of plant fitness. Precise quantification of Pchlide content is necessary not only in studies of flu-related mutants that over-accumulate Pchlide in the dark but also for research on plants suffering from environmental stresses. Due to its low content and interference of chlorophylls, quantitative determination of Pchlide content is a challenge. Here, we describe an optimized protocol for Pchlide extraction from Arabidopsis thaliana seedlings and subsequent analysis using high-performance liquid chromatography (HPLC) coupled with fluorescence detection. Divinyl-Protochlorophyllide (DV-Pchlide, the major form of Pchlide in plants) quantification is achieved by interpolating fluorescence peak areas against an experimentally derived standard curve. This protocol provides a reliable workflow for Pchlide quantification, facilitating the deciphering of the underlying mechanism of plant environmental resilience.
Synchronizing Germination Rates Across Plant Species for Fabricated Ecosystems EcoFAB 2.0
在 EcoFAB 2.0 人工生态系统中实现多种植物萌发速率的同步
Roots are essential organs for plants, facilitating water and nutrient uptake from the soil to support growth. Traditional methods for studying root systems, such as rhizoboxes and rhizotrons, have provided valuable insights. However, advanced methods such as fabricated ecosystems (EcoFAB) combined with new generation microscopes now enable a more detailed investigation of the rhizosphere, the microenvironment surrounding roots, allowing a deeper understanding of root tissue, exudates, and plant–soil interactions. This microenvironment can be used to investigate the adaptation of plants to environmental stress (salinity, drought, higher temperatures). Our procedure focuses on establishing standardized protocols for plant growth tailored to the EcoFAB system, which offers a controlled environment to study root dynamics. This work also contributes new insights into the early stages of plant germination, an area currently underexplored in the literature. While numerous studies focus on plant growth or genetic aspects, such as gene induction, the germination phase remains underexplored. We have developed optimized germination protocols for multiple plant species, ensuring uniform seedling size and sufficient development for seamless integration into the EcoFAB system.
Evaluating Arabidopsis Primary Root Growth in Response to Osmotic Stress Using an In Vitro Osmotic Gradient Experimental System
利用体外渗透梯度实验系统评估拟南芥主根对渗透胁迫的响应生长
The root meristem navigates the highly variable soil environment where water availability limits water absorption, slowing or halting growth. Traditional studies use uniform high osmotic potentials, poorly representing natural conditions where roots gradually encounter increasing osmotic potentials. Uniform high osmotic potentials reduce root growth by inhibiting cell division and shortening mature cell length. This protocol describes a simple and effective in vitro system using a gradient mixer that generates a vertical gradient in an agar gel based on the principle of communicating vessels, exploiting gravity to generate a continuous mannitol concentration gradient (from 0 to 400 mM mannitol) reaching osmotic potentials of -1,2 MPa. It enables long-term Arabidopsis root growth analysis under progressive water deficit, improving phenotyping and molecular studies in soil-like conditions.
Detection and Quantification of Programmed Cell Death in Chlamydomonas reinhardtii: The Example of S-Nitrosoglutathione
在莱茵衣藻中检测和定量程序性细胞死亡:以S-硝基谷胱甘肽为例
Chlamydomonas (Chlamydomonas reinhardtii) is a unicellular model alga that has been shown to undergo programmed cell death (PCD) that can be triggered in response to different stresses. We have recently shown that Chlamydomonas is particularly well suited to the study and quantification of PCD. We have shown for the first time that S-nitrosoglutathione (GSNO), a nitric oxide (NO) donor, is able to induce PCD and can be used as a study system in Chlamydomonas. In this article, we provide a simple and robust protocol for quantifying GSNO-induced PCD, which can be adapted to any other treatment. We explain how to detect NO production in the cell following GSNO treatment. We show how PCD can be identified simply by analyzing the degradation profile of genomic DNA. We also provide an easy and reproducible cell death quantification protocol, which makes it possible to follow the course of PCD over time and highlight very fine differences in the number of affected cells between different samples.
A Plate Growth Assay to Quantify Embryonic Root Development of Zea mays
量化玉米胚根发育的平板生长测定
Murashige-Skoog medium solutions have been used in a variety of plant plate growth assays, yet most research uses Arabidopsis thaliana as the study organism. For larger seeds such as maize (Zea mays), most protocols employ a paper towel roll method for experiments, which often involves wrapping maize seedlings in wet, sterile germination paper. What the paper towel roll method lacks, however, is the ability to image the roots over time without risk of contamination. Here, we describe a sterile plate growth assay that contains Murashige-Skoog medium to grow seedlings starting two days after germination. This protocol uses a section of a paper towel roll method to achieve uniform germination of maize seedlings, which are sterilely transferred onto large acrylic plates for the duration of the experiment. The media can undergo modification to include an assortment of plant hormones, exogenous sugars, and other chemicals. The acrylic plates allow researchers to freely image the plate without disturbing the seedlings and control the environment in which the seedlings are grown, such as modifications in temperature and light. Additionally, the protocol is widely adaptable for use with other cereal crops.
Key features
• Builds upon plate growth methods routinely used for Arabidopsis seedlings but that are inadequate for maize.
• Real-time photographic analysis of seedlings up to two weeks following germination.
• Allows for testing of various growth conditions involving an assortment of additives and/or modification of environmental conditions.
• Samples are able to be collected for genotype screening.
Graphical overview
A Simple Sonication Method to Isolate the Chloroplast Lumen in Arabidopsis thaliana
一种分离拟南芥叶绿体内腔的简单超声方法
The chloroplast lumen contains at least 80 proteins whose function and regulation are not yet fully understood. Isolating the chloroplast lumen enables the characterization of the lumenal proteins. The lumen can be isolated in several ways through thylakoid disruption using a Yeda press or sonication, or through thylakoid solubilization using a detergent. Here, we present a simple procedure to isolate thylakoid lumen by sonication using leaves of the plant Arabidopsis thaliana. The step-by-step procedure is as follows: thylakoids are isolated from chloroplasts, loosely associated thylakoid surface proteins from the stroma are removed, and the lumen fraction is collected in the supernatant following sonication and centrifugation. Compared to other procedures, this method is easy to implement and saves time, plant material, and cost. Lumenal proteins are obtained in high quantity and purity; however, some stromal membrane–associated proteins are released to the lumen fraction, so this method could be further adapted if needed by decreasing sonication power and/or time.
Determination of Paraquat in Arabidopsis Tissues and Protoplasts by UHPLC-MS/MS
UHPLC-MS/MS法测定拟南芥组织和原生质体中百草枯的含量
Paraquat is a cost-effective herbicide, widely used in many countries, that can induce severe oxidative stress in photosynthetic tissues. Studying plant herbicide resistance or antioxidant stress mechanisms requires determining the cellular paraquat level when plants are treated by paraquat. The traditional isotopic labeling method has the potential risk to cause problems to both human health and the environment. For radioisotope manipulation, special operation spaces and strict environmental inspection are also required. In addition, the radiolabeled paraquat is increasingly hard to buy due to the extended production cycle. Here, we describe a nonradioactive method to determine the paraquat level in a small number of Arabidopsis tissues or protoplasts, using a high resolution ultra-high-performance liquid chromatography (UHPLC)-mass spectrometry (MS)/MS method. This method is highly selective and sensitive, and more environmentally compatible and technically feasible than the isotope detection method.
Evaluating Plant Drought Resistance with a Raspberry Pi and Time-lapse Photography
用树莓派和延时摄影评估植物抗旱性
Identifying genetic variations or treatments that confer greater resistance to drought is paramount to ensuring sustainable crop productivity. Accurate and reproducible measurement of drought stress symptoms can be achieved via automated, image-based phenotyping. Many phenotyping platforms are either cost-prohibitive, require specific technical expertise, or are simply more complex than necessary to effectively evaluate drought resistance. Certain mutations, allelic variations, or treatments result in plants that constitutively use less water. To accurately identify genetic differences or treatments that confer a drought phenotype, plants from all experimental groups must be subjected to equal levels of drought stress. This can be easily achieved by growing and imaging plants that are grown in the same pot. Here, we provide a detailed protocol to configure a Raspberry Pi computer and camera module to image seedlings of multiple genotypes growing in shared pots and to transfer images and metadata via the cloud for downstream analyses. Also detailed is a method to calculate percent soil water content of pots while being imaged to allow for comparison of stress symptoms with water availability. This protocol was recently used to uncouple differential water usage from drought resistance in a dwarf Arabidopsis thaliana mutant chiquita1-1/cost1 compared to the wild-type control. It is cost effective, suitable for any plant species, customizable to various biological questions, and requires no prior experience with electronics or basic software programming.